Psychrometric charts and dew points
![](https://stressman.no/wp-content/uploads/2024/03/353010667_6457581160970264_2999798717980528242_n-1024x819.png)
Psychrometric charts are graphical representations of the thermodynamic properties of moist air. They provide a visual way to analyze and understand the relationships between temperature, humidity, and other properties of air. One important parameter represented on a psychrometric chart is the dew point. The dew point is the temperature at which air becomes saturated with […]
Structural Analysis: Small Deflection vs. Large Deflection
![](https://stressman.no/wp-content/uploads/2024/03/Screenshot-2024-03-21-at-9.06.41-1024x572.png)
In the world of structural analysis, precision and efficiency are paramount. Let’s delve into the fascinating realm of small-deflection and large-deflection analysis methods, shedding light on how they differ and their importance. Small Deflection: We can use small deflection analysis when the deformations are small relative to the problem we are evaluating. The biggest challenge […]
ASME B31.3 Chapter IX Requirements
![](https://stressman.no/wp-content/uploads/2024/03/ASME_Chapter_IX-1024x819.png)
Understanding ASME B31.3 Chapter IX Requirements In the realm of engineering and design, adherence to standards is paramount for ensuring safety and efficiency. Let’s delve into the specific requirements outlined in ASME B31.3 Chapter IX, shedding light on key considerations for high-pressure fluid service systems: – System Specification: Owners must designate systems as “High Pressure […]
Subsea Blowout Preventer (BOP) Lowering
![](https://stressman.no/wp-content/uploads/2024/03/Screenshot-2024-03-12-at-18.33.46-810x1024.png)
The delicate balance of lowering a Blowout Preventer (BOP) amidst the sea’s unforgiving waves and currents underscores several crucial aspects of offshore drilling operations: 1. Safety: Lowering a BOP is a critical operation in offshore drilling. The BOP serves as a last line of defense against uncontrolled well-blowouts. Navigating this process amidst challenging sea conditions […]
The mean stress effect
![](https://stressman.no/wp-content/uploads/2024/03/R4-Mean-Stress-Equations-819x1024.png)
The mean stress effect: For a component subjected to cyclic stresses, the mean stress is the average stress of the maximum and minimum stress throughout the cycle. If the maximum and minimum stress are equal but with opposite direction, then mean stress will be zero. The mean stress effect is reducing the fatigue capacity due […]